Wilson WHS150 Programming Make sure battery is good before programming - i.e. don't do it with a weak battery. Press " PTT " button and hold it while turning on radio. A small " P " will be seen on screen. Press " M/S " button, a small " 1 " will be seen on screen. Enter the receive frequency you want programmed. Eg. - 154.100 , the 1 is already there, just enter 54100. Enter 00 Enter 0000 Enter transmit frequency, eg. 54100 Enter 2 digit ctcss tone code from table below, or enter 00 for no tone. Enter 0000 Press " T/M " key. Enter channel number in 2 digits, eg. - 01, 07, etc. Repeat steps 2 to 10 for additional channels or turn off to finish programming. Program receive only - follow steps 1 to 5, skip 6, 7 and 8, then do step 9 and 10. To delete a frequency - Press the " PTT " button and turn on unit. Press " A/D " and select the channel no., eg. - 01 or 11 etc. Press " T/M " to delete frequency from channel. To review a frequency - hold function key and press "M/S" key, ch. will be displayed. Enter ch. number to be reviewed. Radio will scroll through review sequence and back to ch. input. Turn off to discontinue. CTCSS tone code table 00 none 21 136.5 01 67.0 22 141.3 02 71.9 23 146.2 03 74.4 24 151.4 04 77.0 25 156.7 05 79.7 26 162.2 06 82.5 27 167.9 07 85.4 28 173.8 08 88.5 29 179.9 09 91.5 30 186.2 10 94.8 31 192.8 11 97.4 32 203.5 12 100.0 33 210.7 13 103.5 34 218.8 14 107.2 35 225.7 15 110.9 36 233.6 16 114.8 37 241.8 17 118.8 38 250.3 18 123.0 39 69.4 19 127.3 20 131.8 |
Original text (the white background) © Copyright Arthur Bross KC7GF
HTML by Mike Morris WA6ILQ
This page last updated 08-May-2004
The information presented in and on these conversion pages is © Copyright 1995 - 2004 by Kevin Custer W3KKC and multiple originating authors.