Back to Home

Creative Control Products Information Compiled, HTML'd and Maintained by Mike Morris WA6ILQ Formerly Maintained by Robert Meister WA1MIK (SK) I know nothing about this equipment so please don't ask!

Creative Control Products is out of business. All of the available documentation on all of their products is below. The company owner has given Repeater-Builder permission to host them. He does not, however, have the source or object code / firmware, however we have an image of the PROM chip, courtesy of John Nemeth W3RC (ex N3NKC).

SRC-10   Smart Repeater Controller:

	SRC-10 Manual - 1.5 MB PDF file
	SRC-10 Schematic - 30 kB image file
	SRC-10 photograph - 190 kB image file
	Blank SRC-10 Programming Sheet - 4.9 kB
	Firmware patch locations - 4.3 kB
	Firmware image - 1.9 kB ZIP file of Ver 2.25 from 1987.

UAI-10   Universal Audio Integrator:

	A few blank circuit boards are available - contact lbrooks3 at mindspring dot com
	UAI-10 audio mixer manual - 1.35 MB PDF file
	UAI-10 audio mixer schematic - 75 kB image file
	UAI-10 audio mixer photograph #1 - 94 kB image file
	UAI-10 audio mixer photograph #2 - 13 kB image file
	UAI-10 audio mixer sales brochure - 141 kB image file

UAI-20   - this was a later card that also had a MX-Com Corp. MX-355 subaudible tone decoder chip on it.

	UAI-20 Manual - 1.67 MB PDF file
	UAI-20 Schematic - 27 kB image file
	UAI-20 photograph - 94 kB image file Does anyone have a scan of the sales brochure?

UAD-100   Universal Audio Delay (MN-3008 based):

	UAD-100 Manual - 773 kB PDF file
	UAD-100 Schematic - 13 kB image file
	UAD-100 photograph - 13 kB image file Does anyone have a scan of the sales brochure?

PI-10S Synthesizer Interface board. There is no separate manual for this board, it is covered in the SRC-10 manual.

	PI-10/S schematic - 16 kB image file
	PI-10/S photograph - 78 kB image file

System Wiring Diagrams (including remote bases):

	Overall system block diagram - 15 kB image file
	A modified system block diagram using the aux out as a band select - 17 kB image file
	Connecting a Icom 22U BCD frequency select 2M remote base - 17 kB image file
	Icom 22U wiring - 19kb image file
	Connecting an Icom IC2AT 144 MHz radio - 10 kB image file
	Connecting an Icom IC3AT 220 MHz radio - 10 kB image file
	Connecting an Icom IC4AT 440 MHz radio - 10 kB image file

Back to Home

All information above provided by Larry Brooks WBØECV, the owner of CCP.

Page design, layout and hand-coded HTML by Mike Morris WA6ILQ

This page created 25-Jan-2003
This page was last updated on

This web page, this web site, the information presented in and on its pages and in these modifications and conversions is © Copyrighted 1995 and (date of last update) by Kevin Custer W3KKC and multiple originating authors. All Rights Reserved, including that of paper and web publication elsewhere.