HTX-202  (190-1120)           Error Codes             Faxback Doc. # 15722

Your transceiver has two error code displays.  Refer to the following for
an explanation of each error code.

Er1: INTERNAL RAM ERROR

Er1 indicates the transceiver has detected an error in its battery-backed
up operation memory.  This is the most commonly caused by a low lithium
backup battery, but can also be caused by static discharge, or a physical
shock.  To clear the error--

     1.  Turn off the unit.
     2.  Press FUNCTION and CLR (the D key).
     3.  While holding these keys, turn unit on.

This will reset unit and clear memories.

If the transceiver frequently displays the error, have the battery replaced 
by an authorized Radio Shack service center.


ER2:PLL UNLOCK ERROR

Er2 indicates the transceiver's PPL section has unlocked.  Have the
transceiver repaired by an authorized Radio Shack service center. 


(/ir-07/31/95)