HTA-20  (190-1122)         Care and Maintenance        Faxback Doc. # 14956

REPLACING THE FUSE

1.  Set POWER on the amplifier to off and turn off the power source.

2.  Hold the amplifier's in-line fuse holder by both ends, push and turn it
    counterclockwise, then pull it apart.

3.  Replace a blown fuse with an 8-amp fuse of the same type and rating.

4.  Push the holder's ends together and tighten them by turning the holder
    clockwise.

Caring for your Amplifier

Your Radio Shack Amplifier is an example of superior design and
craftsmanship.  The following suggestions will help you care for your
amplifier so you can enjoy it for years.

    Keep the amplifier dry.  If it gets wet, wipe it dry immediately.
    Liquids contain minerals that can corrode electronic circuits.

    Handle the amplifier gently and carefully.  Dropping it can damage
    circuit boards and cases, and can cause it to work improperly.

    Keep the amplifier away from dust and dirt, which can cause premature
    wear of parts.

    Wipe the amplifier with a damp cloth occasionally to keep it looking
    new.  Do not use harsh chemicals, cleaning solvents, or strong
    detergents to clean it.

Modifying or tampering with the amplifier's internal components can cause a 
malfunction and void your authorization to use it.  If your amplifier is
not performing as it should, take it to your local Radio Shack store for 
assistance.


(SP/all-04/26/95)